HELLBINDER PVC RAFT REPAIR ADHESIVE

DON'R LET ONE PUNCTURE RUIN YOUR RIVER TRIP

Emergency PVC repair adhesive for whitewater rafts and other PVC inflatables.

WORKS ON WET PVC

SETS IN UNDER 1MIN

BACK ON THE WATER IN 5MIN

GET HELLBINDER
HELLBINDER EMERGANCY RAFT REPAIR ADHESIVE

DON'T LET ONE PUNCTURE END YOUR RIVER TRIP


Emergency PVC repair adhesive that works on wet surfaces and gets you back on the water in about five minutes.

WORKS ON WET PVC

SETS IN 20 SECONDS

BACK IN THE RIVER IN 5MIN

GET HELLBINDER
Fast Raft repair

BACK ON THE WATER IN ABOUT FIVE MINUTES

A simple repair can keep your day on the river going. Hellbinder is designed for fast emergency PVC repairs, so you can inflate, launch, and get back to the adventure.

WORKS ON WET PVC

Hellbinder bonds directly to wet PVC, helping you make emergency repairs in wet river conditions

HOW TO USE HELLBINDER

Hellbinder makes emergency PVC repairs quick, simple, and ready for the river.

CUT PATCH

CUT PATCH

Locate the puncture and cut a patch 2× larger than the hole.
APPLY HELLBINDER

APPLY HELLBINDER

Coat the patch with Hellbinder, dampen the repair area, and press firmly for 20 seconds.
PATCH AND PADDLE

PATCH AND PADDLE

Wait about 5 minutes, inflate, and continue your adventure.

Small enough to fit in your pocket. Powerful enough to save your trip.

PACK IT BEFORE YOU NEED IT

Keep Hellbinder in your repair kit, dry bag, or PFD pocket so you're ready when the unexpected happens. Its compact size takes up almost no space—but can save the rest of your day on the river.

ADD HELLBINDER TO YOUR DRY BAG

Hellbinder FAQ


One 2g tube can complete approximately four 2-inch PVC patches or two 4-inch PVC patches, depending on the size of the damaged area and how much adhesive is applied.


Hellbinder is designed as a short- to medium-term PVC repair solution to help you safely continue your trip or get off the river. For permanent repairs, we recommend having your raft professionally repaired once you return home.


Yes. Hellbinder is specifically formulated to bond to wet PVC material. In fact, a small amount of moisture is needed to activate the adhesive, making it ideal for emergency raft repairs on the river.


No. Hellbinder is designed only for PVC inflatable rafts, inflatable kayaks, paddle boards, and other PVC inflatables. It is not compatible with Hypalon or CSM materials.


Yes. Hellbinder is non-toxic and formulated to be environmentally friendly, making it safer to use around rivers, lakes, and other outdoor environments

You'll only need a few simple items:


  • Hellbinder PVC Repair Adhesive

  • A piece of PVC patch material

  • Scissors or a knife to cut the patch and open the tube

No additional tools or specialty equipment are required.


No. Hellbinder is a single-part PVC repair adhesive. Simply apply it directly to your PVC patch and complete the repair. No mixing, catalysts, or additional chemicals are required


Yes. While Hellbinder was developed primarily as an emergency raft repair adhesive, it also works well as a short- to medium-term repair for PVC inflatables. Many users choose to continue using the repair until they're ready for a permanent professional repair.

Hellbinder is designed for PVC inflatable equipment, including:


  • Whitewater rafts

  • Inflatable kayaks

  • Inflatable paddle boards (SUPs)

  • Rescue rafts

  • Fishing inflatables

  • Other compatible PVC inflatables


Hellbinder begins setting in under one minute. Most emergency repairs are ready to inflate and return to the water in approximately five minutes, depending on conditions.

Absolutely. Each tube is compact enough to fit easily inside a raft repair kit, dry bag, or PFD pocket, so you're always prepared for unexpected punctures on the water.